GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 78)

3.9 SP-## Special Functions
Parameter group related to special functions with regards
to Line Voltage, Reset Functions, Current Limit, Energy
Savings, Derating, and Accel/Decel Ramp Types.
SP-00 Fault Level
Option: Function:
[0] * Off Use this parameter to customize Fault levels. Use
[0] Off with caution as it will ignore all Warnings
& Alarms for the chosen source.
[1] Warning
[2] Trip
[3] Trip Lock
Failure Alarm Off Warning Trip Trip Lock
10 V low 1 X D
24 V low 47 X D
1.8 V supply low 48 X D
Voltage limit 64 X D
Earth fault during ramping 14 D X
Earth fault 2 during cont. operation 45 D X
Torque Limit 12 X D
Over Current 13 X D
Short Circuit 16 X D
Heatsink temperature 29 X D
Heatsink sensor 39 X D
Control card temperature 65 X D
Power card temperature 69 1) X D
Heatsink temperature 1) 244 X D
Heatsink sensor 1) 245 X D
Power card temperature 1) 247
Table 3.16 Table for Selection of Choice of Action when Selected Alarm Appears
D = Default setting
x = possible selection
1) Only drives 125 HP and above. All others is just a warning.
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 77
3 3