GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 128)

LC-52 Logic Controller Action
Array [20]
Option: Function:
[14] Select preset ref
4
Selects preset reference 4.
If the active preset reference is changed,
it will merge with other preset reference
commands coming from either the digital
inputs or via a Network.
[15] Select preset ref
5
Selects preset reference 5.
If the active preset reference is changed,
it will merge with other preset reference
commands coming from either the digital
inputs or via a Network.
[16] Select preset ref
6
Selects preset reference 6.
If the active preset reference is changed,
it will merge with other preset reference
commands coming from either the digital
inputs or via a Network.
[17] Select preset ref
7
Selects preset reference 7.
If the active preset reference is changed,
it will merge with other preset reference
commands coming from either the digital
inputs or via a Network.
[18] Select Accel/
Decel 1
Selects ramp 1.
[19] Select Accel/
Decel 2
Selects ramp 2.
[20] Select Accel/
Decel 3
Selects ramp 3.
[21] Select Accel/
Decel 4
Selects ramp 4.
[22] Run Issues a start command to the frequency
converter.
[23] Run reverse Issues a start reverse command to the
frequency converter.
[24] Stop Issues a stop command to the frequency
converter.
[25] Qstop Issues a quick stop command to the
frequency converter.
[26] Dcstop Issues a DC stop command to the
frequency converter.
[27] Coast The frequency converter coasts
immediately. All stop commands
including the coast command stop the
Logic Controller.
[28] Freeze output Freezes the output frequency of the
frequency converter.
[29] Start timer 0 Starts timer 0, see LC-20 Logic Controller
Timer for further description.
[30] Start timer 1 Starts timer 1, see LC-20 Logic Controller
Timer for further description.
LC-52 Logic Controller Action
Array [20]
Option: Function:
[31] Start timer 2 Starts timer 2, see LC-20 Logic Controller
Timer for further description.
[32] Set digital out A
low
Any output with LC output A will be low.
[33] Set digital out B
low
Any output with LC output B will be low.
[34] Set digital out C
low
Any output with LC output Cwill be low.
[35] Set digital out D
low
Any output with LC output D will be low.
[36] Set digital out E
low
Any output with LC output E will be low.
[37] Set digital out F
low
Any output with LC output F will be low.
[38] Set digital out A
high
Any output with LC output A will be
high.
[39] Set digital out B
high
Any output with LC output B will be
high.
[40] Set digital out C
high
Any output with LC output C will be
high.
[41] Set digital out D
high
Any output with LC output D will be
high.
[42] Set digital out E
high
Any output with LC output E will be
high.
[43] Set digital out F
high
Any output with LC output Fwill be high.
[60] Reset Counter A Resets Counter A to zero.
[61] Reset Counter B Resets Counter B to zero.
[70] Start timer 3 Start Timer 3, see LC-20 Logic Controller
Timer for further description.
[71] Start timer 4 Start Timer 4, see LC-20 Logic Controller
Timer for further description.
[72] Start timer 5 Start Timer 5, see LC-20 Logic Controller
Timer for further description.
[73] Start timer 6 Start Timer 6, see LC-20 Logic Controller
Timer for further description.
[74] Start timer 7 Start Timer 7, see LC-20 Logic Controller
Timer for further description.
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 127
3 3