GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 157)

Par. No.
# Parameter description Default value 4-set-up Change
during
operation
Conver-
sion
index
Type
ID-8#
ID-80 Fan Running Hours 0 h All set-ups TRUE 74 Uint32
ID-81 Preset Fan Running Hours 0 h All set-ups TRUE 74 Uint32
ID-9#
ID-92 Defined Parameters 0 N/A All set-ups FALSE 0 Uint16
ID-93 Modified Parameters 0 N/A All set-ups FALSE 0 Uint16
ID-98 Drive Identification 0 N/A All set-ups FALSE 0 VisStr[40]
ID-99 Parameter Metadata 0 N/A All set-ups FALSE 0 Uint16
4.1.17 DR-## Data Readouts
Par. No.
# Parameter description Default value 4-set-up Change
during
operation
Conver-
sion
index
Type
DR-0#
DR-00 Control Word 0 N/A All set-ups FALSE 0 V2
DR-01 Reference [Unit] 0 ReferenceFeedbackUnit All set-ups FALSE -3 Int32
DR-02 Reference % 0 % All set-ups FALSE -1 Int16
DR-03 Status Word 0 N/A All set-ups FALSE 0 V2
DR-05 Main Actual Value [%] 0 % All set-ups FALSE -2 N2
DR-09 Custom Readout 0 CustomReadoutUnit All set-ups FALSE -2 Int32
DR-1#
DR-10 Power [kW] 0 kW All set-ups FALSE 1 Int32
DR-11 Power [hp] 0 hp All set-ups FALSE -2 Int32
DR-12 Motor Voltage 0 V All set-ups FALSE -1 Uint16
DR-13 Frequency 0 Hz All set-ups FALSE -1 Uint16
DR-14 Motor current 0 A All set-ups FALSE -2 Int32
DR-15 Frequency [%] 0 % All set-ups FALSE -2 N2
DR-16 Torque [Nm] 0 Nm All set-ups FALSE -1 Int16
DR-17 Speed [RPM] 0 RPM All set-ups FALSE 67 Int32
DR-18 Motor Thermal 0 % All set-ups FALSE 0 Uint8
DR-19 KTY sensor temperature 0 °C All set-ups FALSE 100 Int16
DR-2#
DR-20 Motor Angle 0 N/A All set-ups TRUE 0 Uint16
DR-21 Torque [%] High Res. 0 % All set-ups FALSE -1 Int16
DR-22 Torque [%] 0 % All set-ups FALSE 0 Int16
DR-25 Torque [Nm] High 0 Nm All set-ups FALSE -1 Int32
DR-3#
DR-30 DC Link Voltage 0 V All set-ups FALSE 0 Uint16
DR-32 Brake Energy /s 0 kW All set-ups FALSE 0 Uint32
DR-33 Brake Energy /2 min 0 kW All set-ups FALSE 0 Uint32
DR-34 Heatsink Temp. 0 °C All set-ups FALSE 100 Uint8
DR-35 Drive Thermal 0 % All set-ups FALSE 0 Uint8
DR-36 Drive Nominal Current ExpressionLimit All set-ups FALSE -2 Uint32
DR-37 Drive Max. Current ExpressionLimit All set-ups FALSE -2 Uint32
DR-38 Logic Controller State 0 N/A All set-ups FALSE 0 Uint8
DR-39 Control Card Temp. 0 °C All set-ups FALSE 100 Uint8
DR-4#
DR-40 Trending Buffer Full [0] No All set-ups TRUE - Uint8
DR-41 Keypad Bottom Statusline 0 N/A All set-ups TRUE 0 VisStr[50]
DR-48 Speed Ref. After Ramp [RPM] 0 RPM All set-ups FALSE 67 Int32
Parameter Lists AF-650 GP Programming Guide
156 DET-618C
4 4