GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 162)

4.1.21 SF-# Special Functions
Par. No.
# Parameter description Default value 4-set-up Change
during
operation
Conver-
sion
index
Type
SF-0#
SF-00 Wobble Mode [0] Abs. Freq., Abs. Time All set-ups FALSE - Uint8
SF-01 Wobble Delta Frequency [Hz] 5 Hz All set-ups TRUE -1 Uint8
SF-02 Wobble Delta Frequency [%] 25 % All set-ups TRUE 0 Uint8
SF-03 Wobble Delta Freq. Scaling Resource [0] No function All set-ups TRUE - Uint8
SF-04 Wobble Jump Frequency [Hz] 0 Hz All set-ups TRUE -1 Uint8
SF-05 Wobble Jump Frequency [%] 0 % All set-ups TRUE 0 Uint8
SF-06 Wobble Jump Time ExpressionLimit All set-ups TRUE -3 Uint16
SF-07 Wobble Sequence Time 10 s All set-ups TRUE -1 Uint16
SF-08 Wobble Up/ Down Time 5 s All set-ups TRUE -1 Uint16
SF-09 Wobble Random Function [0] Off All set-ups TRUE - Uint8
SF-1#
SF-10 Wobble Ratio 1 N/A All set-ups TRUE -1 Uint8
SF-11 Wobble Random Ratio Max. 10 N/A All set-ups TRUE -1 Uint8
SF-12 Wobble Random Ratio Min. 0.1 N/A All set-ups TRUE -1 Uint8
SF-19 Wobble Delta Freq. Scaled 0 Hz All set-ups FALSE -1 Uint16
SF-2#
SF-20 High Starting Torque Time [s] ExpressionLimit All set-ups TRUE -2 Uint16
SF-21 High Starting Torque Current [%] ExpressionLimit All set-ups TRUE -1 Uint32
SF-22 Locked Rotor Protection [0] Off All set-ups TRUE - Uint8
SF-23 Locked Rotor Detection Time [s] ExpressionLimit All set-ups TRUE -2 Uint8
SF-8#
SF-84 Process PID Proportional Gain 0.100 N/A All set-ups TRUE -3 Uint16
Parameter Lists AF-650 GP Programming Guide
DET-618C 161
4 4