Show ipv6 neighbors, Syntax, Syntax description – Dell POWEREDGE M1000E User Manual
Page 1003: Default configuration, Command mode, User guidelines, Example
IPv6 Routing Commands
1003
Reports Sent................................... 0
Leaves Received................................ 0
Leaves Sent.................................... 0
show ipv6 neighbors
Use the show ipv6 neighbors command in Privileged EXEC mode to display
information about the IPv6 neighbors.
Syntax
show ipv6 neighbors
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the IPv6 neighbors.
console(config)#show ipv6 neighbors
Neighbor Last
IPv6 Address
MAC Address
isRtr
State
Updated
Interface
-------------------- ----------------- -----
------- ---------
2CSPC4.XModular-SWUM200.book Page 1003 Thursday, March 10, 2011 11:18 AM