Dell POWEREDGE M1000E - Manual (Page 934)

934 IP Routing Commands
Example
The following example displays the IP route summary.
console#show ip route summary
Connected Routes............................... 0
Static Routes.................................. 0
RIP Routes..................................... 0
OSPF Routes.................................... 0
Intra Area Routes.............................. 0
Inter Area Routes.............................. 0
External Type-1 Routes......................... 0
External Type-2 Routes......................... 0
Total routes................................... 0
show ip traffic
Use the show ip traffic command in User EXEC mode to display IP statistical
information. Refer to RFC 1213 for more information about the fields that
are displayed.
Syntax
show ip traffic
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
2CSPC4.XModular-SWUM200.book Page 934 Thursday, March 10, 2011 11:18 AM