Dell POWEREDGE M1000E - Manual (Page 291)

CDP Interoperability Commands 291
8
CDP Interoperability Commands
Industry Standard Discovery Protocol (ISDP) is a proprietary Layer 2 network
protocol which inter-operates with Cisco network equipment and is used to
share information between neighboring devices. PowerConnect switches
participate in the ISDP protocol and are able to both discover and be
discovered by devices that support the Cisco Discovery Protocol (CDP).
ISDP is based on CDP, which is a precursor to LLDP.
Commands in this Chapter
This chapter explains the following commands:
clear isdp counters
The clear isdp counters command clears the ISDP counters.
Syntax
clear isdp counters
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
clear isdp counters show isdp
clear isdp table show isdp entry
isdp advertise-v2 show isdp interface
isdp enable show isdp neighbors
isdp holdtime show isdp traffic
isdp timer
2CSPC4.XModular-SWUM200.book Page 291 Thursday, March 10, 2011 11:18 AM