Dot1x dynamic-vlan enable, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 767: Default configuration, Command mode, User guidelines
Advertising
802.1x Commands
767
dot1x dynamic-vlan enable
Use the dot1x dynamic-vlan enable command in Global Configuration mode
to enable the capability of creating VLANs dynamically when a
RADIUS–assigned VLAN does not exist in the switch. Use the no form of the
command to disable this capability.
Syntax
dot1x dynamic-vlan enable
no dot1x dynamic-vlan enable
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Disabled.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 767 Thursday, March 10, 2011 11:18 AM
Advertising