Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual

Page 881: Ip igmp version, Syntax, Default configuration

Advertising
background image

IGMP Commands

881

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

This command has no user guidelines.

Example

The following example sets at 10 seconds the interval between general queries

sent at startup for VLAN 15.

console(config)#interface vlan 15

console(config-if-vlan15)#ip igmp startup-query-

interval 10

ip igmp version

Use the ip igmp version command in Interface Configuration mode to

configure the version of IGMP for an interface.

Syntax

ip igmp version

version

version

— IGMP version. (Range: 1-3)

Default Configuration

The default version is 3.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

This command has no user guidelines.

Example

The following example configures version 2 of IGMP for VLAN 15.

console#interface vlan 15

2CSPC4.XModular-SWUM200.book Page 881 Thursday, March 10, 2011 11:18 AM

Advertising