Dell POWEREDGE M1000E - Manual (Page 456)

456 IGMP Snooping Querier Commands
Syntax
ip igmp snooping querier version version
no ip igmp snooping querier version
• version — IGMP version. (Range: 1–2)
Default Configuration
The querier version default is 2.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1
show ip igmp snooping querier
This command displays IGMP Snooping Querier information. Configured
information is displayed whether or not IGMP Snooping Querier is enabled.
If a querier is active in the network and IGMP snooping querier is enabled,
the querier’s IP address is shown in the Last Querier Address field.
Syntax
show ip igmp snooping querier [detail | vlan vlan_id ]
Syntax Description
When the optional argument vlan_id is not used, the command shows the
following information.
Parameter Description
vlan_id Specifies a VLAN ID value.
2CSPC4.XModular-SWUM200.book Page 456 Thursday, March 10, 2011 11:18 AM