Debug auto-voip, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 1445: Command mode, User guidelines, Example, Debug clear

Advertising
background image

Serviceability Tracing Packet Commands

1441

debug auto-voip

Use the debug auto-voip command to enable Auto VOIP debug messages.

Use the optional parameters to trace H323, SCCP, or SIP packets respectively.

Use the “no” form of this command to disable Auto VOIP debug messages.

Syntax

debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]

Default Configuration

Auto VOIP tracing is disabled by default.

Command Mode

Privileged EXEC mode.

User Guidelines

There are no usage guidelines for this command.

Example

console#debug auto-voip

debug clear

Use the debug clear command to disable all debug traces.

Syntax

debug clear

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode.

2CSPC4.XModular-SWUM200.book Page 1441 Thursday, March 10, 2011 11:18 AM

Advertising