Dell POWEREDGE M1000E - Manual (Page 784)

784 802.1x Commands
User Guidelines
The following fields are displayed by this command.
The following table describes the significant fields shown in the display.
Example
The following example displays information about the 802.1x clients.
console#show dot1x clients all
Clients Authenticated using Monitor Mode....... 1
Field Description
Clients
Authenticated using
Monitor Mode
Indicates the number of Dot1x clients authenticated using
Monitor mode.
Clients
Authenticated using
Dot1x
Indicates the number of Dot1x clients authenticated using
802.1x authentication process.
Field Description
Interface The port number.
Username The username representing the identity of the Supplicant.
This field shows the username when the port control is
auto or mac-based. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it
shows the last user that was authenticated successfully.
Supp MAC Address The MAC-address of the supplicant
Session Time The amount of time, in seconds, since the client was
authenticated on the port.
Filter ID The Filter ID assigned to the client by the RADIUS server.
This field is not applicable when the Filter-ID feature is
disabled on the RADIUS server and client.
VLAN Assigned The VLAN assigned to the client by the radius server.
When VLAN assignments are disabled, RADIUS server
does not assign any VLAN to the port, and this field is set
to 0.
2CSPC4.XModular-SWUM200.book Page 784 Thursday, March 10, 2011 11:18 AM