Dell POWEREDGE M1000E - Manual (Page 1283)

Captive Portal Commands 1281
Example
console(config-CP 2)#group 2
interface
Use the interface command to associate an interface with a captive portal
configuration. Use the “no” form of this command to remove an association.
Syntax
interface interface
no interface interface
interface —An interface or range of interfaces.
Default Configuration
No interfaces are associated with a configuration by default.
Command Mode
Captive Portal Instance Config mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#interface 1/0/2
locale
The locale command is not intended to be a user command. The
administrator must use the Web UI to create and customize captive portal
web content. This command is primarily used by the show running-config
command and process as it provides the ability to save and restore
configurations using a text based format.
Syntax
locale web-id
2CSPC4.XModular-SWUM200.book Page 1281 Thursday, March 10, 2011 11:18 AM