Dell POWEREDGE M1000E - Manual (Page 1140)

1140 OSPF Commands
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information in
the system.
console#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
------- -------- -------- -------- ---------- -------
0.0.0.2 5.5.5.5 10 40 5 1
timers spf
Use the timers spf command in Router OSPF Configuration mode to
configure the SPF delay and hold time. Use the no form of the command to
reset the numbers to the default value.
Syntax
timers spf delay-time hold-time
no timers spf
• delay-time — SPF delay time. (Range: 0–65535 seconds)
• hold-time — SPF hold time. (Range: 0–65535 seconds)
2CSPC4.XModular-SWUM200.book Page 1140 Thursday, March 10, 2011 11:18 AM