Commands in this chapter – Dell POWEREDGE M1000E User Manual

Page 1018

Advertising
background image

1018

Multicast Commands

• Applications used for datacasting: Since multimedia transmission has

become increasingly popular, multicast transmission use has increased.

Multicast transmission may be used to efficiently accommodate this type

of communication. For instance, the audio and video signals are captured,

compressed and transmitted to a group of receiving stations. Instead of

using a set of point-to-point connections between the participating nodes,

multicasting can be used for distribution of the multimedia data to the

receivers. The participating stations are free to join or leave an audio-cast

or a video-cast as needed. The variable membership maintenance is

managed efficiently through multicasting.

Commands in this Chapter

This chapter explains the following commands:

ip mcast boundary ip pim dr-priority

ip pim spt-

threshold

show ip mcast mroute

static

ip mroute

ip pim hello-

interval

show bridge

multicast address-

table count

show ip pim bsr-router

ip multicast

ip pim join-prune-

interval

show ip multicast show ip pim interface

ip multicast ttl-

threshold

ip pim register-

rate-limit

show ip mcast

boundary

show ip pim neighbor

ip pim

ip pim rp-address

show ip multicast

interface

show ip pim rp hash

ip pim bsr-border

ip pim rp-

candidate

show ip mcast

mroute

show ip pim rp

mapping

ip pim bsr-

candidate

ip pim sparse

show ip mcast

mroute group

ip pim dense

ip pim ssm

show ip mcast

mroute source

2CSPC4.XModular-SWUM200.book Page 1018 Thursday, March 10, 2011 11:18 AM

Advertising