Parameter description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 825: User guidelines, Example, Ip dhcp excluded-address, Syntax, Ip dhcp excluded, Address
DHCP Server and Relay Agent Commands
825
no ip dhcp conflict logging
Parameter Description
This command does not require a parameter description.
Default Configuration
Conflict logging is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#ip dhcp conflict logging
ip dhcp excluded-address
Use the ip dhcp excluded-address command in Global Configuration mode
to exclude one or more DHCP addresses from automatic assignment. Use the
no form of the command to allow automatic address assignment for the
specified address or address range.
Syntax
ip dhcp excluded-address
low-address
{
high-address
}
no ip dhcp excluded-address
low-address
{
high-address
}
Parameter Description
Parameter
Description
Low-address
An IPv4 address indicating the starting range for exclusion from
automatic DHCP address assignment.
2CSPC4.XModular-SWUM200.book Page 825 Thursday, March 10, 2011 11:18 AM