Dell POWEREDGE M1000E - Manual (Page 527)

Link Dependency Commands 527
Example
console(config)#link-dependency group 1
console(config-linkDep-group-1)#
add gigabitethernet
Use this command to add member gigabit Ethernet port(s) to the
dependency list.
Syntax
add gigabitethernet intf-list
• intf-list — List of Ethernet interfaces in unit/slot/port format. Separate
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid Ethernet interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add gigabitethernet 1/0/1
add tengigabitethernet
Use this command to add member ten gigabit Ethernet port(s) to the
dependency list.
Syntax
add tengigabitethernet intf-list
2CSPC4.XModular-SWUM200.book Page 527 Thursday, March 10, 2011 11:18 AM