Dell POWEREDGE M1000E - Manual (Page 1392)

1388 Mode Commands
modes other than Global Configuration mode, the do command will not
appear in the list of commands shown in the help, nor will prompting be
available.
Syntax
do line
• line — Command to be executed. It should be an unambiguous command
from the Privileged EXEC mode. Commands such as configure, devshell,
and hidden commands are forbidden.
Default Configuration
This command has no default configuration.
Command Mode
All except Privileged EXEC and User EXEC modes.
Example
console(config)#do show ip interface
Management Interface:
IP Address..................................... 192.168.100.131
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 192.168.100.1
Burned In MAC Address.......................... 0006.2932.8142
Network Configuration Protocol Current......... DHCP
Management VLAN ID............................. 1
Routing Interfaces:
Netdir Multi
InterfaceIP AddressIP MaskBcast CastFwd
----------------------------------------- ------------
2CSPC4.XModular-SWUM200.book Page 1388 Thursday, March 10, 2011 11:18 AM