Dell POWEREDGE M1000E - Manual (Page 1194)

1194 OSPFv3 Commands
show ipv6 ospf interface stats
Use the show ipv6 ospf interface stats command in User EXEC mode to
display the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Syntax
show ipv6 ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the interface statistics for VLAN 5.
console>show ipv6 ospf interface stats vlan 5
OSPFv3 Area ID................................. 0.0.0.1
Spf Runs....................................... 265
Area Border Router Count....................... 1
AS Border Router Count......................... 0
Area LSA Count................................. 6
IPv6 Address...................................
FE80::202:BCFF:FE00:3146/1283FFE::2/64
OSPF Interface Events.......................... 53
Virtual Events................................. 13
Neighbor Events................................ 6
External LSA Count............................. 0
2CSPC4.XModular-SWUM200.book Page 1194 Thursday, March 10, 2011 11:18 AM