Dell POWEREDGE M1000E - Manual (Page 1379)

Line Commands 1375
Syntax
history size number-of-commands
no history size
Parameter Description
Default Configuration
The default command history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the command history buffer size to 20
commands for the current terminal session.
console(config-line)#history size 20
line
Use the line command in Global Configuration mode to identify a specific
line for configuration and enter the line configuration command mode.
Syntax
line {console | telnet | ssh}
• console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Parameter Description
number-of-
commands
Specifies the number of commands the system may record in its
command history buffer. (Range: 0-216)
2CSPC4.XModular-SWUM200.book Page 1375 Thursday, March 10, 2011 11:18 AM