Dell POWEREDGE M1000E - Manual (Page 930)

930 IP Routing Commands
-------- --------- ----------- ----------
176.1.1.1 1 1 flowers
176.2.1.1 passive 2
Routing Information Sources:
Gateway Last Update
176.1.1.2 0:00:17
Preference: 60
Routing Protocol is "ospf"
Redistributing: OSPF, External direct, Static, RIP
Interfaces:
Interface Metric Key-chain
-------- --------- ----------- ----------
176.1.1.1 10 flowers
176.2.1.1 1
Routing Information Sources:
Gateway State
176.1.1.2 Full
External Preference: 60
Internal Preference: 20
show ip route
Use the show ip route command in Privileged EXEC mode to display the
current state of the routing table. The output of the command also displays
the IPv4 address of the default gateway and the default route associated with
the gateway.
Syntax
show ip route [ip-address [mask | prefix-length] [longer-prefixes] | protocol]
2CSPC4.XModular-SWUM200.book Page 930 Thursday, March 10, 2011 11:18 AM