Dell POWEREDGE M1000E - Manual (Page 1327)

Clock Commands 1325
User Guidelines
This command is relevant for both received Unicast and Broadcast.
Example
The following defines SNTP trusted-key.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode
to enable a client to use Simple Network Time Protocol (SNTP) predefined
Unicast clients. To disable an SNTP Unicast client, use the no form of this
command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
Examples
The following example enables the device to use Simple Network Time
Protocol (SNTP) to request and accept SNTP traffic from servers.
console(config)# sntp unicast client enable
2CSPC4.XModular-SWUM200.book Page 1325 Thursday, March 10, 2011 11:18 AM