Parameter description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 1532: User guidelines, Example, Show logging, Syntax
1528
Syslog Commands
Parameter Description
Default Configuration
The default port number is 514.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the port number for the server.
Example
The following example sets the syslog message port to 300.
console(config-logging)#port 300
show logging
Use the show logging command in Privileged EXEC mode to display all
logging information, including auditing status.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Parameter
Description
port
The port number for syslog messages. (Range: 1-65535)
2CSPC4.XModular-SWUM200.book Page 1528 Thursday, March 10, 2011 11:18 AM