Show memory cpu, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1562: Command mode, User guidelines, Example
1558
System Management Commands
IP Address............................ 10.240.4.115
Subnet Mask........................... 255.255.255.0
Default Gateway....................... 10.240.4.1
IPv6 Prefix is .......................
FE80::20A:1EFF:FE11:1100/64
ServPort Configured Protocol Current...None
Burned In MAC Address..................0006.2932.814C
show memory cpu
Use the show memory cpu command to check the total and available RAM
space on the switch.
Syntax
show memory cpu
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show memory cpu
Total Memory........................... 262144 KBytes
Available Memory Space................. 121181 KBytes
2CSPC4.XModular-SWUM200.book Page 1558 Thursday, March 10, 2011 11:18 AM