Dhcpv6 – Dell POWEREDGE M1000E User Manual

Page 116

Advertising
background image

116

Command Groups

DHCPv6

sntp

Sets the IPv4 address of the NTP server to be

used for time synchronization of the client.

DP

show ip dhcp binding

Displays the configured DHCP bindings.

PE

show ip dhcp conflict

Displays DHCP address conflicts for all relevant

interfaces or a specified interface.

PE

show ip dhcp global

configuration

Displays the DHCP global configuration.

PE

show ip dhcp pool

Displays the configured DHCP pool or pools.

UE or

PE

show ip dhcp server

statistics

Displays the DHCP server binding and message

counters.

PE

a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Command

Description

Mode

a

clear ipv6 dhcp

Clears DHCPv6 statistics for all interfaces or for

a specific interface.

PE

dns-server

Sets the IPv6 DNS server address which is

provided to a DHCPv6 client by the DHCPv6

server.

v6DP

domain-name

Sets the DNS domain name which is provided

to a DHCPv6 client by the DHCPv6 server.

v6DP

ipv6 dhcp pool

Enters IPv6 DHCP Pool Configuration mode. GC

ipv6 dhcp relay

Configures an interface for DHCPv6 relay

functionality.

IC

ipv6 dhcp server

Configures DHCPv6 server functionality on an

interface.

IC

prefix-delegation

Defines Multiple IPv6 prefixes within a pool for

distributing to specific DHCPv6 Prefix

delegation clients.

v6DP

service dhcpv6

Enables DHCPv6 configuration on the router. GC

show ipv6 dhcp

Displays the DHCPv6 server name and status. PE

Command

Description

Mode

a

2CSPC4.XModular-SWUM200.book Page 116 Thursday, March 10, 2011 11:18 AM

Advertising