Dell POWEREDGE M1000E - Manual (Page 1526)

1522 Syslog Commands
logging buffered
Use the logging buffered command in Global Configuration mode to limit
syslog messages displayed from an internal buffer based on severity. To cancel
the buffer use, use the no form of this command.
Syntax
logging buffered [ severity–level ]
no logging buffered
Parameter Description
Default Configuration
The default value for level is info.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits
the commands displayed to the user.
Parameter Description
severity–level (Optional) The number or name of the desired severity level.
Range:
[ 0 | emergencies ]
[ 1 | alerts ]
[ 2 | critical ]
[ 3 | errors ]
[ 4 | warnings ]
[ 5 | notifications ]
[ 6 | informational ]
[ 7 | debugging ]
2CSPC4.XModular-SWUM200.book Page 1522 Thursday, March 10, 2011 11:18 AM