Dell POWEREDGE M1000E - Manual (Page 314)

314 DHCP Layer 2 Relay Commands
Syntax
dhcp l2relay remote-id remoteId vlan vlan-range
no dhcp l2relay remote-id remoteId vlan vlan-range
Parameter Description
Default Configuration
Setting the DHCP Option 82 Remote ID is disabled by default.
Command Mode
Global Configuration.
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay remote-id dslforum vlan
10,20-30
dhcp l2relay trust
Use the dhcp l2relay trust command to configure an interface to mandate
Option-82 on receiving DHCP packets.
Syntax
dhcp l2relay trust
no dhcp l2relay trust
Default Configuration
DHCP Option 82 is discarded by default.
Parameter Description
remoteId The string to be used as the remote ID in the Option 82
(Range: 1 - 128 characters).
2CSPC4.XModular-SWUM200.book Page 314 Thursday, March 10, 2011 11:18 AM