Dell POWEREDGE M1000E - Manual (Page 445)

IGMP Snooping Commands 445
IGMP Snooping Admin Mode.................... Disabled
Fast Leave Mode............................. Disabled
Group Membership Interval................... 260
Max Response Time........................... 10
Multicast Router Present Expiration Time.... 300
show ip igmp snooping mrouter
Use the show ip igmp snooping mrouter command in Privileged EXEC mode
to display information on dynamically learned Multicast router interfaces.
Syntax
show ip igmp snooping mrouter
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example shows IGMP snooping mrouter information.
console#show ip igmp snooping mrouter
Port........................................1/0/1
ip igmp snooping (VLAN)
Use the ip igmp snooping command in VLAN Configuration mode to enable
IGMP snooping on a particular interface or on all interfaces participating in a
VLAN. To disable IGMP snooping use the no form of this command.
2CSPC4.XModular-SWUM200.book Page 445 Thursday, March 10, 2011 11:18 AM