Example, Ip igmp-proxy unsolicited-report-interval, Syntax – Dell POWEREDGE M1000E User Manual

Page 891: Default configuration, Command mode, User guidelines

Advertising
background image

IGMP Proxy Commands

891

Example

The following example resets the host interface status parameters of the

IGMP Proxy router.

console(config)#interface vlan 15

console(config-if-vlan15)#ip igmp-proxy reset-status

ip igmp-proxy unsolicited-report-interval

Use the ip igmp-proxy unsolicited-report-interval command in Interface

Configuration mode to set the unsolicited report interval for the IGMP Proxy

router. This command is valid only if IGMP Proxy on the interface is enabled.

Syntax

ip igmp-proxy unsolicited-report-interval

seconds

seconds

— Unsolicited report interval. (Range: 1-260 seconds)

Default Configuration

The default configuration is 1 second.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

This command has no user guidelines.

Example

The following example sets 10 seconds as the unsolicited report interval for

the IGMP Proxy router.

console(config)#interface vlan 15

console(config-if-vlan15)#ip igmp-proxy unsolicited-

report-interval 10

2CSPC4.XModular-SWUM200.book Page 891 Thursday, March 10, 2011 11:18 AM

Advertising