Show ip rip interface brief, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 1226: Command mode, User guidelines, Example

Advertising
background image

1226

Routing Information Protocol Commands

Authentication Key............................. "pass123"

Authentication Key ID.......................... 35

Bad Packets Received........................... -----

Bad Routes Received............................ -----

Updates Sent................................... -----

show ip rip interface brief

Use the show ip rip interface brief command in Privileged EXEC mode to

display general information for each RIP interface. For this command to

display successful results routing must be enabled per interface (i.e. ip rip).

Syntax

show ip rip interface brief

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode.

User Guidelines

This command has no user guidelines.

Example

The following example displays general information for each RIP interface.

console#show ip rip interface brief

Send

Receive

RIP

Link

Interface

IP Address

Version

Version

Mode

State

---------- ----------

-------- ----------- --------- ----------

vlan1

0.0.0.0

RIP-2

Both

Disable

Down

vlan2

0.0.0.0

RIP-2

Both

Disable

Down

2CSPC4.XModular-SWUM200.book Page 1226 Thursday, March 10, 2011 11:18 AM

Advertising