Dell POWEREDGE M1000E - Manual (Page 1354)

1352 Configuration and Image File Commands
Default Configuration
No description is attached to the file.
Command Mode
Privileged EXEC mode
User Guidelines
The description accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the description.
The CLI does not filter illegal combinations of characters on entry and may
accept entries up to the first illegal character or reject the entry entirely.
Example
The following example attaches a file description to image2.
console#filedescr image2 "backedup on 03-22-05"
rename
Use the rename command in Privileged EXEC mode to rename a file present
in flash.
Syntax
rename source dest
• source — Source file name
• dest — Destination file name
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSPC4.XModular-SWUM200.book Page 1352 Thursday, March 10, 2011 11:18 AM