Dell POWEREDGE M1000E - Manual (Page 315)

DHCP Layer 2 Relay Commands 315
Configuration Mode
Interface Configuration (Ethernet, Port-channel).
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/0/1)#dhcp l2relay trust
dhcp l2relay vlan
Use the dhcp l2relay vlan command to enable the L2 DHCP Relay agent for
a set of VLANs. All DHCP packets which arrive on interfaces in the
configured VLAN are subject to L2 Relay processing. Use the "no" form of
this command to disable L2 DHCP Relay for a set of VLANs.
Syntax
dhcp l2relay vlan vlan-range
no dhcp l2relay vlan vlan-range
Parameter Description
Default Configuration
DHCP L2 Relay is disabled on all VLANs by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Parameter Description
vlan-range The list of VLAN IDs.
2CSPC4.XModular-SWUM200.book Page 315 Thursday, March 10, 2011 11:18 AM