Dell POWEREDGE M1000E - Manual (Page 969)

IPv6 Routing Commands 969
User Guidelines
This command has no user guidelines
Example
console(config-if-vlan3)#ipv6 mld-proxy unsolicit-
rprt-interval 10
ipv6 mld query-interval
The ipv6 mld query-interval command sets the MLD router's query interval
for the interface. The query-interval is the amount of time between the
general queries sent when the router is querying on that interface. Use the
“no” form of this command to set the query interval to the default.
Syntax
ipv6 mld query-interval query-interval
no ipv6 mld query-interval
• query-interval — Query interval (Range: 1–3600).
Default Configuration
The default query interval is 125 seconds.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld query-interval 130
2CSPC4.XModular-SWUM200.book Page 969 Thursday, March 10, 2011 11:18 AM