Syntax, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual

Page 1368: User guidelines, Example, Dos-control l4port

Advertising
background image

1364

Denial of Service Commands

Syntax

dos-control icmp [

size

]

no dos-control icmp

size

— Maximum ICMP packet size. (Range: 0-16376). If size is

unspecified, the value is 512.

Default Configuration

Denial of Service is disabled.

Command Mode

Global Configuration mode

User Guidelines

This command has no user guidelines.

Example

The following example activates the Maximum ICMP Packet Denial of

Service protection with a maximum packet size of 1023.

console(config)#dos-control icmp 1023

dos-control l4port

Use the dos-control l4port command in Global Configuration mode to

enable L4 Port Denial of Service protection. If the mode is enabled, Denial of

Service prevention is active for this type of attack. If packets ingress having

Source TCP/UDP Port Number equal to Destination TCP/UDP Port

Number, the packets are dropped.

Syntax

dos-control l4port
no dos-control l4port

Default Configuration

Denial of Service is disabled.

2CSPC4.XModular-SWUM200.book Page 1364 Thursday, March 10, 2011 11:18 AM

Advertising