Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 755: Examples
Advertising
![background image](/manuals/618599/755/background.png)
VLAN Commands
755
Default Configuration
Routing is not enabled on any VLANs by default.
Command Mode
VLAN Database mode
User Guidelines
The user is not required to use this command. Routing can still be enabled
using the routing command in VLAN Interface Configuration mode.
Examples
console(config-vlan)# vlan routing 10 1
index
Internal interface ID. This optional parameter is listed in the
configuration file for all VLAN routing interfaces. When a
nonstop forwarding failover occurs, this information enables
the system to correlate checkpointed state information with the
proper interfaces and their configuration.
Parameter
Description
2CSPC4.XModular-SWUM200.book Page 755 Thursday, March 10, 2011 11:18 AM
Advertising