Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual

Page 246: Examples, Deny | permit (ip acl), Deny, Permit (ip acl)

Advertising
background image

246

ACL Commands

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Access list names can consist of any printable character. Names can be up to

31 characters in length.

Examples

The following examples create an ACL to discard any HTTP traffic from

192.168.77.171, but allow all other traffic from 192.168.77.171:

console(config)#access-list alpha deny ip

192.168.77.171 0.0.0.0 0.0.0.0 255.255.255.255 eq

http

console(config)#access-list alpha permit ip

192.168.77.171 0.0.0.0 any

deny

|

permit (IP ACL)

Use this command in Ipv4-Access-List Configuration mode to create a new

rule for the current IP access list. Each rule is appended to the list of

configured rules for the list.
The command is enhanced to accept the optional time-range parameter. The

time-range parameter allows imposing a time limitation on the IP ACL rule

as defined by the parameter

time-range-name

. If a time range with the

assign-queue

queue-

id

Specifies the particular hardware queue for handling traffic that

matches the rule. (Range: 0-6)

mirror

interface

Allows the traffic matching this rule to be copied to the

specified interface.

redirect

interface

This parameter allows the traffic matching this rule to be

forwarded to the specified unit/slot/port.

Parameter

Description

2CSPC4.XModular-SWUM200.book Page 246 Thursday, March 10, 2011 11:18 AM

Advertising