Dell POWEREDGE M1000E - Manual (Page 1444)

1440 Serviceability Tracing Packet Commands
NOTE: Debug commands are not persistent across resets.
debug arp
Use the debug arp command to enable tracing of ARP packets. Use the “no”
form of this command to disable tracing of ARP packets.
Syntax
debug arp
no debug arp
Default Configuration
ARP packet tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug arp
debug console debug ip pimsm debug lacp debug vrrp
debug dot1x debug ip vrrp debug
mldsnooping
show debugging
debug
igmpsnooping
debug ipv6 dhcp debug ospf
debug ip acl debug ipv6 mcache debug ospfv3
debug ip dvmrp debug ipv6 mld debug ping
2CSPC4.XModular-SWUM200.book Page 1440 Thursday, March 10, 2011 11:18 AM