Dell POWEREDGE M1000E - Manual (Page 1037)

Multicast Commands 1037
Syntax
show ip mcast mroute {detail | summary}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary or all the details of the multicast
table.
console#show ip mcast mroute summary
console#show ip mcast mroute detail
show ip mcast mroute group
Use the show ip mcast mroute group command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
groupipaddr value.
Syntax
show ip mcast mroute group groupipaddr {detail | summary}
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 1037 Thursday, March 10, 2011 11:18 AM