Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual

Page 227: Ip http authentication, Syntax, Default configuration

Advertising
background image

AAA Commands

227

Command Mode

Global Configuration mode

User Guidelines

This command has no user guidelines.

Example

The following example defines password "xxxyyyzzz" to control access to user

and privilege levels.

console(config)# enable password xxxyyyzzz

ip http authentication

Use the ip http authentication command in Global Configuration mode to

specify authentication methods for http server users. To return to the default,

use the no form of this command.

Syntax

ip http authentication

method1

[

method2

...]

no ip http authentication

method1

[

method2

...] — Specify at least one from the following table:

Default Configuration

The local user database is checked. This action has the same effect as the

command ip http authentication local.

Keyword

Source or destination

local

Uses the local username database for authentication.

none

Uses no authentication.

radius

Uses the list of all RADIUS servers for authentication.

tacacs

Uses the list of all TACACS+ servers for authentication.

2CSPC4.XModular-SWUM200.book Page 227 Thursday, March 10, 2011 11:18 AM

Advertising