Dell POWEREDGE M1000E - Manual (Page 239)

AAA Commands 239
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
To use the ! character as part of the username or password string, it should be
enclosed within quotation marks. For example, username “test!xyz” password
“test!xyz”.
Example
The following example configures user bob with password xxxyymmmm and
user level 15.
console(config)# username bob password ?
<password> Enter the password. The special characters
allowed in the password include ~ ` ! @ # $ % ^ & * ( ) _ -
+ =
[ ] { } \ | : ; ' < > . , /.
console(config)# username bob password xxxyyymmm privilege
15
username password encrypted
The Administrator uses the username password encrypted command in
Global Configuration mode to transfer local user passwords between devices
without having to know the passwords. The password parameter must be
exactly 128 hexadecimal characters. The user represented by the username
level The user level. Level 0 can be assigned by a level 15 user to
another user to suspend that user’s access. Range: 0-15. Enter
access level 1 for Read Access or 15 for Read/Write Access.
encrypted Encrypted password entered, copied from another switch
configuration.
Parameter Description
2CSPC4.XModular-SWUM200.book Page 239 Thursday, March 10, 2011 11:18 AM