Dell POWEREDGE M1000E - Manual (Page 605)

QoS Commands 605
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel)
mode
User Guidelines
None
Example
The following example configures mapping for user priority 1 and traffic class
2.
console(config)#classofservice dot1p-mapping 1 2
classofservice ip-dscp-mapping
Use the classofservice ip-dscp-mapping command in Global Configuration
mode to map an IP DSCP value to an internal traffic class.
Syntax
classofservice ip-dscp-mapping ipdscp trafficclass
• ipdscp — Specifies the IP DSCP value to which you map the specified
traffic class. (Range: 0–63 or an IP DSCP keyword – af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef)
• trafficclass — Specifies the traffic class for this value mapping. (Range:
0–6)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.XModular-SWUM200.book Page 605 Thursday, March 10, 2011 11:18 AM