Show captive-portal configuration locales, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 1301: Command mode, User guidelines, Example

Advertising
background image

Captive Portal Commands

1299

console#show captive-portal configuration 1 interface 1/0/1

CP ID..................................... 1

CP Name................................... cp1

Interface................................. 1/0/1

Interface Description..................... Unit: 1 Slot: 0 Port: 1

Gigab...

Operational Status........................ Disabled

Disable Reason............................ Interface Not Attached

Block Status.............................. Not Blocked

Authenticated Users....................... 0

show captive-portal configuration locales

Use the show captive-portal configuration locales command to display

locales associated with a specific captive portal configuration.

Syntax

show captive-portal configuration

cp-id

locales

cp-id

—Captive Portal Configuration ID.

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode.

User Guidelines

There are no user guidelines for this command.

Example

console#show captive-portal configuration 1 locales

Locale Code

---------------

en

2CSPC4.XModular-SWUM200.book Page 1299 Thursday, March 10, 2011 11:18 AM

Advertising