Dell POWEREDGE M1000E - Manual (Page 1089)

OSPF Commands 1089
• neighbor — Drop the adjacency with all OSPF neighbors. On each
neighbor's interface, send a one-way hello. Adjacencies may then be
reestablished.
• interface vlan vlan-id — Drop adjacency with all neighbors on a specific
interface.
• neighbor-id — Drop adjacency with a specific router ID on a specific
interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example shows the options for the clear ip ospf command.
console#clear ip ospf ?
<cr> Press enter to execute the command.
configuration Restore OSPF configuration to defaults
counters Clear OSPF counters
neighbor Bounce all OSPF neighbors
redistribution Flush and reoriginate external LSAs
compatible rfc1583
Use the compatible rfc1583 command in Router OSPF Configuration mode
to enable OSPF 1583 compatibility. Use the no form of the command to
disable it.
2CSPC4.XModular-SWUM200.book Page 1089 Thursday, March 10, 2011 11:18 AM