Dell POWEREDGE M1000E - Manual (Page 838)

838 DHCP Server and Relay Agent Commands
Parameter Description
Default Configuration
The command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
show ip dhcp conflict
Use the show ip dhcp conflict command in User EXEC mode to display
DHCP address conflicts for all relevant interfaces or a specified interface. If
an interface is specified, the optional statistics parameter is available to view
statistics for the specified interface.
Syntax
show ip dhcp conflict [ address ]
Parameter Description
Default Configuration
The command has no default configuration.
Command Mode
Privileged EXEC modes
Parameter Description
address A valid IPv4 address
Parameter Description
address A valid IPv4 address for which the conflict information is
desired.
2CSPC4.XModular-SWUM200.book Page 838 Thursday, March 10, 2011 11:18 AM