Dell POWEREDGE M1000E - Manual (Page 1513)

SSH Commands 1509
wRW3QtgXaGwYt2rdlr3x8ViAF6B7AKYd8xGVVjyJTD6TjrCRRwQHg
B/BHsFr
z/Rl1SYa0vFjel/7/0qaIDSHfHqWhajYkMa4xPOtIye7oqzAOm1b7
6l28uTB
luBEoLQ+PKOKMiK8sQ==
Fingerprint(hex):
58:7f:5c:af:ba:d3:60:88:42:00:b0:2f:f1:5a:a8:fc
Fingerprint(bubbleBabble): xodob-liboh-heret-tiver-
dyrib-godac-pynah-muzyt-mofim-bihog-cuxyx
show crypto key pubkey-chain ssh
Use the show crypto key pubkey-chain ssh command in Privileged EXEC
mode to display SSH public keys stored on the switch.
Syntax
show crypto key pubkey-chain ssh [username username ] [fingerprint bubble-
babble | hex]
• username — Specifies the remote SSH client username. (Range: 1–48
characters)
• bubble-babble — Fingerprints in Bubble Babble format.
• hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaults
to Hex format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1509 Thursday, March 10, 2011 11:18 AM