Dell POWEREDGE M1000E - Manual (Page 262)

262 Address Table Commands
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
In this example the MAC Address Table aging time is set to 400.
console(config)#mac address-table aging-time 400
mac address-table multicast filtering
Use the mac address-table multicast filtering command in Global
Configuration mode to enable filtering of Multicast addresses. To disable
filtering of Multicast addresses, use the no form of the command.
Syntax
mac address-table multicast filtering
no mac address-table multicast filtering
Parameter Description
This command has no arguments or keywords.
Default Configuration
Disabled. All Multicast addresses are flooded to all ports of the relevant
VLAN.
Command Mode
Global Configuration mode
User Guidelines
If switches exist on the VLAN, do not change the unregistered Multicast
addresses’ state to drop on the switch ports.
2CSPC4.XModular-SWUM200.book Page 262 Thursday, March 10, 2011 11:18 AM