Dell POWEREDGE M1000E - Manual (Page 1265)

Auto-Install Commands 1263
Command Mode
Global Config
User Guidelines
This command has no user guidelines.
boot auto-copy-sw allow-downgrade
Use the boot auto-copy-sw allow-downgrade command in Privileged EXEC
mode to enable downgrading the firmware version on the stack member if the
firmware version on the manager is older than the firmware version on the
member.
Use the no form of the command to disable downgrading the image.
Syntax
boot auto-copy-sw allow-downgrade
no boot auto-copy-sw allow-downgrade
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Enable.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1263 Thursday, March 10, 2011 11:18 AM