Dell POWEREDGE M1000E - Manual (Page 616)

616 QoS Commands
console(config-classmap)#no match class-map Dell
match cos
Use the match cos command in Class-Map Configuration mode to add to the
specified class definition a match condition for the class of service value (the
only tag in a single-tagged packet or the first or outer 802.1Q tag of a double-
VLAN tagged packet).
Syntax
match cos
• cos-value — Specifies the CoS value as an integer (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition to the specified
class.
console(config-classmap)#match cos 1
match destination-address mac
Use the match destination-address mac command in Class-Map
Configuration mode to add to the specified class definition a match
condition based on the destination MAC address of a packet.
Syntax
match destination-address mac macaddr macmask
2CSPC4.XModular-SWUM200.book Page 616 Thursday, March 10, 2011 11:18 AM