Show diffserv service interface port-channel, Syntax description, Parameter description – Dell POWEREDGE M1000E User Manual
Page 643: Default configuration, Command mode, User guidelines, Example, Show diffserv service, Interface port-channel
QoS Commands
643
No policy is attached to this interface in this
direction.
show diffserv service interface port-channel
Syntax Description
show diffserv service interface port-channel
channel-group
{in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
Not applicable
Example
console#show diffserv service interface port-channel 1 in
DiffServ Admin Mode........................... Enable
Interface..................................... po1
Direction..................................... In
No policy is attached to this interface in this direction
Parameter
Description
channel-group
A valid port-channel in the system. (Range: 1–18)
in
Show ingress policies.
out
Show engress policies.
2CSPC4.XModular-SWUM200.book Page 643 Thursday, March 10, 2011 11:18 AM