Show isdp interface, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 298: Command mode, User guidelines, Example
Advertising
298
CDP Interoperability Commands
Compiled Wed 21-Mar-07 12:20 by tinhuang
show isdp interface
The show isdp interface command displays ISDP settings for the specified
interface.
Syntax
show isdp interface { all | gigabitethernet
unit/slot/port
| tengigabitethernet
unit/slot/port
}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp interface all
Interface Mode
--------------- ----------
1/0/1 Enabled
1/0/2 Enabled
1/0/3 Enabled
1/0/4 Enabled
1/0/5 Enabled
1/0/6 Enabled
1/0/7 Enabled
2CSPC4.XModular-SWUM200.book Page 298 Thursday, March 10, 2011 11:18 AM
Advertising